- How
long does it take?
- What
do I do with the remaining waste?
- Are
they safe?
- What
does Class I, Division I mean?
- How
good is the recycled solvent?
- Do
I need liners?
- What
kind of warranty do I get?
- There's
so many systems! How do I choose?
- Why
do I need a Vacuum Generator?
- Are
there any codes that we need to follow?
- Are
they easy to use?
- What
kind of maintenance is required?
- Do
you have a list of solvents that I can recycle?
- Isn't
it easier to just use a waste hauler for everything?
It depends on many different
factors, such as the type of solvent, the type of residue, humidity,
pressure, elevation, etc. Our systems have been designed to be as
efficient as possible and under "normal" working conditions
and the expected batch time is between 3-8 hours. As can be expected,
the bigger the machine, the longer it will take. Users seeking repetitive
or continuous use will benefit from our C series which can seperate
the diathermic oil from the still for quick exchange of residue,
eliminating the need to wait for the system to cool and then reheat
again, efficiently speeding up your recycling process.
You will treat the residue
the same as you are currently treating your hazardous waste. However,
utilizing one of our recycling systems can actually lower your rating,
so companies that are a LQG or an SQG can benefit greatly from the
reduce paperwork and requirements. The lower your classification
the more lenient the laws are and how apply to your company. Here's
a great EPA compliance information site.
You can also
have your waste tested for corrosiveness, ignitibility, toxicity,
and reactivity. If your waste passes these test it could be deemed
non-hazardous.
Absolutely. Our systems
have multiple safety devices built into the system. In addition,
our Class I Division I explosion proof models are safe for even
"hazardous" environments. Our systems have been reviewed
by the highest standards of the ECC (The European UL) under EN 50014,
EN 50015, and EN60079-14
If a recyler
is not certified by a Nationally Recognized Testing Laboratory for
use in a normal location, it did not pass the test for normal locations
(U.S Fire Code requires that a solvent distillation unit must be
used only in locations in accordance with its listing). If your
recycler didn't pass the test, you must build a special room to
house your potentially "hazardous" unit.
Basically if
all of your other equipment is normal, you do not need a Class I,
Division I unit. However, if you are surrounded by special devices
marked Class I, Division I, you will need one of our explosion proof
systems.
The quality of the distilled
solvent should match your virgin specifications and will be void
of any colors from the contaminants. Our units typically will recover
95-100% of the solvent that is in processed.
It only makes
sense to use our solvent recycler liners
in your waste management program. Liners:
- Increase
the efficiency of our systems
- Improves
your recycled solvent's quality
- Reduces
your contact with hazardous materials
- And
frankly.... it sure beats sticking your head in a condenser full
of nasty waste residue to scrape it all out.
We're
not saying that you have to use them and we've designed a tilting
mechanism on our units for ease of use... but we sure wouldn't operate
our systems without them.
Back to
Top
Our standard one year
warranty.
This can be a very difficult
question, as there are many variables the you will need to consider.
However we're here to make the decision easier for you. Please give
us a call at 866.867.6622 and after a few quick questions, we'll
be able to select a system to match your needs.
A vacuum generator lowers
the atmospheric pressue in the system, reducing the temperatures
needed to distill your solvent. In general:
The use of vacuum generator
is required if you are recycling of solvents which have boiling
points higher than 302°F/150°C (Verify the security sheet
(MSDS) of the product that is to be recycled.).
The use of vacuum generator
is not advisable for the recycling of solvents which have boiling
points lower than 212°F/100°C (Verify the security sheet
(MSDS) of the product that is to be recycled.)
Yes, if your solvent
is considered Flammable or Combustible. NFPA 30, NFPA 33, NFPA 70.
In additon, check with your fire marshal in your area for any other
restrictions that your area may have. Also, have a licensed electrician
wire your recycler properly to ensure that all of your local codes
are met.
Very easy. We pre-program
our units to match your solvent needs. All you need to do is pour
in the solvent, close the lid, turn it on, then walk away. Our recyclers
are automatic leaving you free to concentrate on your customers and
your business. Reprograming the unit is also easy. If you can program
your VCR, you can reprogram your recycler.
Every 1000 hours
or year, whichever comes first, our systems should have the diathermic
oil changed. Depending on amount of use, the top seal may need to
be replaced after a couple years.
Yes:
Acetone
Acetontrile
Aircraft Engine Oil
Alcohol, Isopropyl
Alcohol, Ethyl
Benzene
Butyl Gellosolve
Cyclohexane
Cyclonexanol
Chloroform
Carbon Tetracnloride
Cyclohexanone
Diesel Fuels
Dimethylformamide
Ethylbenzene
Ethylene Glycol
Ethanol
Ethyl Gellosolve
Ethyl Acetate
Furfuraloehyde
Hexenes
Isopropanol
Isobutanol
Jp-4 Jet Fuel
Kerosene
Methanol
Methyl Cellgsolve
Methylene Dichloride
Methyl Ethyl Ketone
Methyl Isobutyl Ketone
Methyl Acetate
Monochlorobenzene
Mineral Oils
Mineral Spirits
Naphtha
n-Pentane
n-Hexane
n-Heptane
n-Propanol
n-Butanol
n-Methl-2-Pyrrolidone
n-Butyl Acetate
Octanes (Gasoline)
Perchloroethylene
Pyrdne
sec-Butanol
Toluene
Thichloroethylene
Trimethylbenzene
Turpentine
Xylene
1,1,1 Trichloroethane
1,2 Dichloroethane
If you didn't
see your chemical on the list, don't panic! Just give us a call
or send us your MSDS and we'll get back to you right away.
Answer these
questions:
- Do you spend
more than $100 in disposal costs?
- Do you spend
more than $100 in purchasing virgin solvent?
- Are you a
SQG or a LQG?
- Do you have
10 minutes in your day to lower your expenses?
If you answered
yes to any of these questions the answer is no. Through recycling
you can:
- Lower your
disposal costs
- Reduce
your need to buy virgin solvent
- Lower your
classification
All of this
will save you money... who knew protecting the environment could
be so cost effective?
In addition
be careful choosing a waste hauler. "Out of sight" does
not mean "out of mind". Your name and EPA identification
number are tied to your waste. If they spill it or it leaks, the
cleanup costs are yours. Just a few gallons spilled on the ground
can cost you your business. It's a "cradle to grave" responsibility
so wouldn't you rather reduce your liability by reducing your waste?
|